Using the TV's Features
Channels menu Channels menu
action buttons selection
\
Channels
You can customize the channel listing hy enabling or disabling the display of
certain channels. For instance, you may disable channels that you never watch.
You can restore disabled channels at a later point in time.
1. If the Guide Plus+ system isn't on your screen, press GUIDE on your
remote control.
2. Press MENU to select the Menu bar.
3. Use the right and left arrows to highlight the Channels menu selection.
4. Use the up and down arrows to select a channel.
Then use the Channels Menu Action Buttons as described next.
Channels Menu Action Buttons
While browsing the Channels menu, the following Action buttons appear:
Can¢e! Press 1 on the remote to cancel any changes you made since
entering the Channels Menu.
• Change Press 2 on the remote to change the channel number for the
highlighted channel line.
• On/O[.[ Press 3 on the remote to toggle the state of the channel between
On and Off
Setup
The Setup menu allows you to access the GUIDE Plus+ system setup information. To access the
Setup option:
1. If the Guide Plus+ system isn't on your screen, press GUIDE on your remote control.
2. Press MENU to select the Menu Bar.
3. Use the right arrow to highlight the Setup menu selection.
4. Use the up and down arrows to select Change system settings, Review options, or
View demo.
• Change system settLngs Confirms the settings you completed in the GUIDE Plus+
system setup are correct.
• Review op_ons Displays the GUIDE Plus+ auto display options.
On Automatically displays the GUIDE Plus+ system when you press the ON-OFF
button on the remote control.
O1/ Disables the GUIDE Plus+ system from being displayed when you press the
ON*OFF button on the remote control.
View d_o Runs the GUIDE Plus+ system demonstratiorL
]Vole:lf you have not completed your GUIDE Plus+ system setup, these options will not be
available. A screen will prompt you to complete your setup.
34 Chapter 3
To Next Page
Loading...
