Back Panel Buttons
Ifyou cannot locate your remote, you can use the back panel buttons on your TV to operate many TV features.
,/ _ + VOL - • CH • MENU INPUT _'
INPUT: Displays the Source Select List.
MENU : Displays the TV Main Menu.
CH • : Scans down through the channel list. In the TV menu system, it acts like the down arrow on the remote control
and can be used to select menu options.
CH • : Scans up through the channel list. Inthe TV menu system, it acts like the up arrow on the remote control
and can be used to select menu options.
VOL-: Decreases the volume. In the TV menu system, it acts likethe left arrow on the remote control and can be used to
select menu options.
VOL+: Increases the volume. In the TV menu system, it acts like the right arrow on the remote control and can be used to
select menu options.
POWER (_b): Turns the TV on and off.
Front Panel
About remote control working distance and angle, see page 18.
Power/Standby Indicator: Light up in red when the TV is in standby mode. Light out when the TV is on.
Remote Control Sensor: Remote control IR sensor, which receives infrared ray sent by remote control.
Power/Standby Indicator
i Remote Control Sensor
17
To Next Page
Loading...
