Recording
Date and Time Displays
LCD Monitor or Viewfinder Displays
Press F2 to select mode.
I NOV 18. 97
Date Display
Auto Date Display
NOV18.97 PMl1:59
Date/Time Display
I NOV 18.97 [
TV On-Screen Display
I
Date Off Display
TAYLOR WAYNE
Created Title Display
NOV 18. 97
Return to Date Display
The mode selected will be recorded.
To Record the Date, Time, or Title Display on Your Tape
1. Place the camcorder in record pause.
2. Place mode select dial in RELEASE.
Note: Whenever the mode select dial is in
LOCK, AUTO DATE is automatically
selected.
3. Press SEL. until [] DISP. appears on
the LCD monitor or in the viewfinder.
4. Repeatedly press F2 to display the
date, time, or title you have
previously stored.
If you select AUTO DATE, it will
automatically appear, be recorded for
five seconds, and then disappear
whenever:
• The date has been set or changed.
• This display mode has just been
selected.
• The tape has been changed or the
tape compartment opened.
5. Press F2 to remove the display from
the LCD monitor or viewfinder
when you are finished recording it.
6. To record the display again, place
the camcorder in record pause and
press 1=2.
45
To Next Page
Loading...
Need help?
General
