RCA PROV700C

First-Time Operation
2. Attach the adapter/charger.
Since the battery must be charged before it can be used the first time,
attach the adapter/charger to the camcorder.
To AC 100-240V, 50/60 Hz
POWER
Indicator
__ Adapter/Charger
A. Connect one end of the DC cable to
the DC OUT jack on the
adapter/charger.
B. Connect the other end of the DC
cable to the DC IN jack on the
camcorder as shown above.
C. Plug the adapter/charger's plug into
an operating outlet. The adapter/
charger's POWER indicator will
light.
LENS CO VER
Control
Handstrap Velcro Strip
(Under Flap)
Handstrap Flap
3. Adjust the handstrap to fit
your hand.
• Lift the flap on the handstrap and
separate the velcro strip.
• Insert your hand, adjust the strap to
fit snugly, refasten the strap, and
close the flap.
4. Slide LENS COVER control to
open lens cover.
4