O tional,AcCeSSOries
FB1260 and FB120 Rechargeable
Batteries
These rechargeable nickel-cadmium
batteries are designed specifically for long
life. The FB 1260 is a 1-hour battery. The
FB 120 powers your camcorder
approximately twice as long as the
FB 1260 (depending on how much you use
the LCD monitor, zoom, and pause).
Both can be recharged with the AC
adapter/charger that came with your
camcorder.
CPS91 AC Battery Charger
The CPS91 battery charger plugs directly
into an AC outlet and charges the battery
that came with your camcorder, FB 1260
and FB 120. Because the CPS91 operates
on 100-240 Volts, 50/60 Hz, it can be used
virtually anywhere in the world. A plug
adapter may be required in some
countries. Charging takes approximately
seven hours for the FB 1260 (1-hour
battery), nine hours for the battery that
came with your camcorder, and 13 hours
for the FB 120 (2-hour battery).
All specifications and descriptions
of accessories are subject to
change without notice.
Using the Optional AC088 Tripod
Mounting the camcorder on a tripod,
such as AC088, will keep the camcorder
steady and produce excellent video
results.
This tripod's fluid-effect head provides
smooth camera pan and tilt. The quick-
release mount makes it easy to attach or
remove the camcorder. The grooved,
tubular 3-section leg design folds down to
26" when not in use. Rubber feet allow
for sure footing.
: J
Cautions: Before using a tripod, make sure it is
stable enough to hold the camcorder without
falling over. Do not transport the camcorder
attached to the tripod.
When attaching your camcorder to a tripod, be
careful not to force the tripod screw into the
camcorder's tripod mounting hole.
The tripod screw should not protrude into the
camcorder more than approximately three-eighth
(3/8) inch. Forcing the screw could damage the
mounting hole on the bottom of the camcorder.
59