Entering the TV Menu Mode:
1. Push the TV button on the remote.
2. Push the MENU button.
This puts the remote in TV Menu
Mode. The TV Menu should now be
visible on the television. The
INDICATOR LIGHT will blink
continuously to indicate the remote is
now in TV Menu Mode.
While in TV MENU these buttons will
function as follows:
VOL UP/DOWN buttons will operate
as CURSOR RIGHT/LEFT.
CH+/- keys will operate as CURSOR
UP/DOWN.
For RCA, GE, ProScan TVs pushing
the MENU button will select the high
lighted item. The numeric buttons
may also be used to select the MENU
choice. The ENTER key may also be
used to select all menu choices.
Note: Not all functions in competitive
models and brands of televisions may
be fully supported.
Exiting the TV Menu Mode:
To exit the Menu Mode and clear the
TV screen push the TV button on the
remote. The INDICATOR LIGHT
should go out indicating the remote is
now out of TV Menu Mode and will
revert to it’s normal mode of
operation.
Note: The remote will automatically
exit the TV Menu Mode after 10
seconds of inactivity with no buttons
being pushed.
Special notes:
1. Because of the wide variety of menu
formats, some experimenting may be
required.
2. SONY: Pressing the ENTER button
while in menu mode returns to
previous menu.
3. ZENITH: Push the menu button a
second time to move from the SET-UP
MENU to the VIDEO MENU.
To Next Page
Loading...
Need help?
General
