14
Entering the DVD Menu Mode:
1. Push the DVD•AUX button on the
remote.
2. Push the MENU key.
This puts the remote in DVD Menu
Mode. The DVD Menu should now be
visible on the television. The INDIC
TOR LIGHT will blink continuously to
indicate the remote is now in DVD
Menu Mode.
While in DVD MENU MODE these
buttons will function as follows:
VOLUME UP/DOWN button will
operate as CURSOR RIGHT/LEFT.
CH+/- button will operate as CURSOR
UP/DOWN.
Pushing the ENTER button will select the
highlighted item. The numeric buttons
may also be used to select the MENU
choice.
Note: Not all functions in competitive
models and brands of DVD systems
may be fully supported.
Exiting the DVD Menu Mode:
Push the DVD•AUX button on the
remote. The INDICATOR LIGHT should
go out indicating the remote is now out
of DBS Menu Mode and will revert to
it’s normal mode of operation.
Note: The remote will automatically
exit the DVD•CABLE Menu Mode
after 15 seconds of inactivity with no
keys being pushed.
Special notes:
1. Because of the wide variety of menu
formats, some experimenting may be
required.
(BLINK)
DVD Menu Function
To Next Page
Loading...
Need help?
General
