8
Clearing Tracks from a Program
When you clear a track from memory, all tracks that follow it move up so that you
can add a new track at the end of the program.
1 Press the MODE button until
PROG
flashes in the display.
2 Use the REPEAT/ENTER button to locate the track you want to clear.
3 Press either of the TRACK/SEARCH buttons until
0
flashes in the display.
4 Press REPEAT/ENTER to clear the track.
PROG
ESP
Clearing All Tracks
You can turn off RESUME and then shut off the
power (or open the compartment door) to completely
clear the program memory. . .unless you really want
to clear each track individually.
Playing CDs in Your Car
Always wanted a car CD player? Now you’ve got one that you can take with you
when you leave the car and not miss a beat (well if you’re really quick you might
not miss even one beat, but you know what I mean).
Adapters
- Unplugged
Always unplug the adapter from the cigarette lighter
before you start your car and before you leave your car.
DC IN 3VLINE OUT
Powering Up (in the Car)
Batteries are one available option; or, use the Car DC adapter, which plugs into the
cigarette lighter receptacle and into the DC IN 3V jack on the back of the player.
To Next Page
Loading...
Need help?
General
