4
Basic Features
Now that you’re plugged in and playing CDs, you’re ready to use some
of the basic features.
Liquid Crystal Display (LCD)
The liquid crystal display tells you what your CD player is doing. (See
Appendix A for detailed information about the display).
Pause
Press the PLAY/PAUSE button while a disc is playing to interrupt play (the disc
icon flashes in the display). Press PLAY/PAUSE again to continue play.
Track
Use the TRACK/SEARCH buttons to move backward or forward through a disc
to a specific song.
Repeat
Press the REPEAT/ENTER button once (in Play mode) to repeat current track;
press again to repeat all tracks; press a third time to turn off repeat function.
Check the display to see which repeat mode you’re in (see Appendix A).
Stop
Press STOP to stop play (the disc icon freezes in the display).
STOP Means Stop, Right?
Well, it also means shut down. Press STOP a second time to
shut off the player, (or wait about 15 seconds for it to shut
itself off).
You’re on the Right Track (or is it TRACK)
When you see TRACK/SEARCH, in this book, it refers to the
button you press; when you see Track or track, it refers to a
selection on a disc (indicated by the number in the display).
REPEAT
ENTER
MODE
OPEN
PLAY/PAUSE
TRACK/SEARCH
SHUFFLE
ESP
STOP
ESP
To Next Page
Loading...
Need help?
General
