7
Program Mode
You can program as many as 20 tracks into memory in order to change the play
order of a disc.
PROG
ESP
Programming Play Order
1 Press the MODE button until PROG flashes in the display.
2 Press one of the TRACK/SEARCH buttons until you see the desired track number.
3 Press REPEAT/ENTER to store that track into the program memory (Pr appears in
the display letting you know you can store another track).
You can store from 1 to 20 tracks (until PF appears in the display, indicating that
the program is full).
4 When you finish programming tracks, press PLAY/PAUSE to begin play.
Reviewing a Program and Replacing a Track
1 Press the MODE button until PROG flashes in the display.
2 Use the REPEAT/ENTER button to review the program order until you see the
track number you want to replace.
3 Press either of the TRACK/SEARCH buttons to select a new track number.
4 Press REPEAT/ENTER to replace the old track number with the one flashing in
the display.
5 Press PLAY/PAUSE to begin play.
Why Would I Do This?
One reason is to hear a CD played in the order that
the artists originally intended. A prime example is the
CD version of the Beatles’ Sgt. Pepper album, which
gives you an alternative order for the cuts from side
one of the vinyl version.
Don't Just Sit There—Do Something!
Unless the RESUME is active, you need to press
PLAY/PAUSE when you finish programming in order
to begin disc play.
To Next Page
Loading...
Need help?
General
