Wake Settings
Setting WAKE Time
Your digital clock operates on a
12-hour standard mechanism. A will
light for AM time and P will light for
PM time.
1. Press SET TIME / WAKE button
repeatedly until wake 1 or wake 2
icon is blinking.
2. Press REV or FWD to set the wake
time.
Press and hold REV or FWD to fast
search reverse or forward clock time.
Waking by Selected Source
Press WAKE 1 or WAKE 2 repeatedly
to select wake source for the
respective wake setting.
You may be woken up by TONE ,
RADIO or CD .
The corresponding icon will show on
the display.
Wake to Tone
When wake to tone is selected, the
icon will be displayed.
The unit is equipped with GRAD-U-
WAKE feature, the alarm tone volume
will increase gradually to its maximum
in about 30 to 45 seconds.
Tip:Tip:
Tip:Tip:
Tip: If you set SLEEP function with
low volume level before going to bed,
we advise using Wake to tone mode
to wake you up since its volume will
automatically increase.
Wake to Radio
When wake to radio is selected, the
icon will be displayed.
Setting Wake Station
1. Select radio band.
2. Select desired station.
3. Press MEMO SET to enter preset
mode.
4. Press MEMO RECALL repeatedly until
the “AL” memory location is reached.
5. Press MEMO SET to save the station
into alarm memory location.
6. Adjust the volume by turning
VOLUME.
Note:Note:
Note:Note:
Note: When you turn off the alarm by
pressing
OFFOFF
OFFOFF
OFF, the alarm will turn on at
the same time tomorrow.
EN
11
A
P
A
P
Untitled-2 4/1/03, 3:48 PM13
To Next Page
Loading...
