EN
Setting Recording
Quality
You can select between three
recording qualities. Default is SP.
Definition
• SP (Standard Play) - allows about 320
min recording on RP5013, 680 min
recording on RP5015.
• LP (Long Play) - allows about 440
min recording on RP5013, 910 min
recording on RP5015.
• HQ (High Quality) - allows about 120
min recording on RP5013, 270 min
recording on RP5015.
1. Press MENU until
SP / LP / HQ show
on display.
2. Toggle between
SP, LP and HQ by
pressing REVERSE
or FORWARD.
3. Confirm selection by pressing MENU
or STOP.
Recording quality / condition
Setting Recording
Condition
You can select between two recording
conditions. Default is DICT.
Definition
• CONF (Conference) - in a more open
area and recording source is far from
the unit.
• DICT (Dictation) - in a more enclosed
area and recording source is close to
the unit.
1. Press MENU
twice until DICT or
CONF show on
display.
2. Select recording
condition by
pressing REVERSE
or FORWARD.
3. Confirm selection
by pressing MENU.
(You may press
STOP to exit from
further selection.)
HQLP SP
DICT
CONF
Tip:Tip:
Tip:Tip:
Tip:
For conferences, to obtain
optimum recording quality, place
the recorder with the microphone
freely exposed to the sound source as close
as convenient. A built-in automatic recording
level control will set the optimum record
level during manual recording. Avoid
recording near unwanted noise sources, such
as air conditioners or fans.
10
To Next Page
Loading...
Need help?
General
