RCA RS2041 User Manual

Showing the Demonstration
Press DEMO to turn on/off demonstration mode.
The demonstration scrolls through all display
operations.
Setting the Clock
1. Press and hold CLOCK to enter clock setting
mode. The hour flashes on the display.
2. Press SKIP BACKWARD or SKIP
FORWARD on the main unit or PRESET
or PRESET on the remote control to set
the hour .
Press CLOCK to shift to minute digits.
3. Press SKIP BACKWARD or SKIP
FORWARD on the main unit or PRESET
or PRESET on the remote control to set
the minute .
4. Press PROG/SET to save settings.
Press STOP to quit settings.
Setting the Timer
1. Press and hold TIMER until the ON and clock
hour flashes on the display ( ON - timer on
time ).
2. For setting time, press SKIP BACKWARD
or SKIP FORWARD on the main unit or
PRESET or PRESET on the remote
control to set the hour and then press TIMER
to shift to minute digits.
3. Press SKIP BACKWARD or SKIP
FORWARD on the main unit or PRESET
or PRESET on the remote control to set
the minute.
4. Press TIMER to change to OF (timer off time)
with clock time flashing. Repeat steps 2 & 3 for
timer off time setting.
5. Press TIMER to select source. Press SKIP
BACKWARD or SKIP FORWARD on
the main unit or PRESET or PRESET on
the remote control to select between CD /
TUNER / REC TU .
6. Press TIMER to set volume. Rotate the
VOLUME control to select desired volume
level.
7. Press PROG/SET to save settings.
Press STOP to quit setting.
The timer is automatically activated once timer
setting is saved.
Activating the Timer
Press and release TIMER to turn on/off the alarm.
The timer is active when the clock icon is lit.
6
EN
Settings
Note:
When system is ON, you can press CLOCK
to display the current time for about 2
seconds.
RS2041-EN 1/19/04 9:46 AM Page 11

RCA RS2041 Specifications

General

Brand	RCA
Model	RS2041
Category	Stereo System
Language	English