RCA VR702HF

,
SET TIME AND DATE
Time --:--
(hh:mm)
Date --/--/--
Press MENU to cancel
Enter the data using the number buttons. Press 0
before single-digit numbers and follow the on-screen
directions.
I Time/Date Display 1
Pressing INFO on the remote displays
the time and date on the screen.
SET TIME AND DATE
Time 12:34 PM
Date 11116100 Thursday
Press CLEAR to correct
Press MENU to set
VCR Plus+® SILVER GUIDE SYSTEM
The VCR Plus+ SILVER programming system makes VCR set
up automatic by setting and updating the clock and
channel list for you. During the one-time QuickSet Guide
set up, the VCR prompts you to enter your zip code. Soon
after, the VCR clock will set itself and your VCR Plus+
programming system channel list will be input for you.
Time, date, and VCR Plus+ system information are
downloaded from participating TV stations over your
antenna or cable system. Time and date are updated each
time the VCR is turned off (and after every power
interruption). So, when your TV stations or cable company
update their lineups, your ProScan VCR will get the most
current channel list automatically, freeing you from having
to manually change the channel list yourself.
If your VCR Plus+ Silver system fails to download the
proper information for any reason, you can always
manually map the channels. You can also turn off AUTO
VCR Plus+ if you keep getting prompts about "multiple
cable" services by choosing (2) in the VCR Plus+ SETUP
menu.
VCR Plus+ system is a registered trademark of Gernstar Oevelopment Corporation.
The VCR Plus+ system is manufactured under the license from Gemstar Development Corporation.
VCR Plus+ Download
When your VCR Plus+ SILVERsystem
first downloads information, this can
take anywhere from 5 minutes to
several hours depending on when
local broadcasters send the data.
14