RCF spa ART 9-AX Reference Guide 11
The INPUT WIZARD is a quick way to configure input parameters
for channels 1 and 2.
When MIC is selected, an input EQ & compressor setting can be
selected for 3 use cases:
SPEECH
MALE SINGER
FEMALE SINGER
The LINEAR option sets EQ and compressor to flat.
Equalization options are not available when EDIT mode is set to
EASY, as input equalizers are disabled anyway.
Also for this guided configuration, all changes are applied at the
end, after pressing OK.
System Settings
The System Settings pages allow full
configuration of the ART 9-AX engine;
some pages are also accessible from
other starting points.
The SPEAKER PRESET page offers the
option to select the same loudspeaker
tunings available in the standard ART 9,
to allow a perfect match in all
conditions:
LINEAR, no emphasis, recommended
for regular use
BOOST, loudness equalization,
recommended for background music
at low playback level
STAGE, for use as a stage monitor
The MIX ENGINE BYPASS option turns
the digital mixing engine off, and the
speaker becomes a standard ART 9
equivalent.
The only control that can be accessed is
the SPEAKER PRESET.
BLUETOOTH and CROSSOVER pages are
already detailed in other sections of this
document.
To Next Page
Loading...
Need help?
General
