November 2018 RCF S.p.A. Ver 1.0 – page 3
MAC OS INSTALLATION
This package type requires Mac OS X 10.5 or higher
1) Unzip the installer file to a temporary folder
2) From the temporary folder, click on EVOX JMix8 Firmware Update.pkg to launch the installation
3) Press the [Continue] button to proceed with the installation and then press the [Install] button.
Do not change the settings on the Customize page. For the software to work properly, both items
(EvoxUpdate and Libusb) must remain selected
4) Enter the User Name and Password of your Mac to allow the installation
5) When the installation is completed, press the [Close] button
On the Applications of your Mac it will appear “EVOX JMIX8 Firmware Update”
To Next Page
Loading...
