RCF UP 4061 - Speci Cations

UP 4061 • UP 4121 • UP 4161
Specications
Type
60 W - Mono - Table-top (UP 4061)
120 W - Mono - Table-top (UP 4121)
160 W - Mono - Table-top (UP 4161)
Output power
nominal: 60 W - maximum: 90 W
(10 msec ON - 0,1 sec OFF) (UP 4061)
nominal: 120 W - maximum: 180 W
(10 msec ON - 0,1 sec OFF) (UP 4121)
nominal: 160 W - maximum: 220 W
(10 msec ON - 0,1 sec OFF) (UP 4161)
Frequency response
50 - 15,000 Hz (± 3 dB)
Distortion
≤ 1% (1 kHz - nominal power)
Signal/noise ratio
≥ 80 dB
Inputs/Sensitivity - Impedance
Unbalanced RCA, input
775 mV - 50 k Ω
80 mV - 50 k Ω
Balanced input on terminals strip:
775 mV - 100 k Ω (bal.)
Outputs for speakers / ohms
4 Ω
Outputs for speakers / volts
25V - 50V - 70V - 100V
(10 Ω, 41 Ω, 80 Ω, 162 Ω) (UP 4061)
25V - 50V - 70V - 100V
(5Ω, 21 Ω, 41 Ω, 83 Ω) (UP 4121)
25V - 50V - 70V - 100V
(4Ω, 15,5 Ω, 30,5 Ω, 62 Ω) (UP 4161)
Supplementary outputs/Voltage -Impedance
RCA, in parallel with unbalanced input
16
Auxiliary output “Overload”
18 Vdc - 300 mA
Tone controls
bass: ± 12 dB - 100 Hz
treble: ± 12 dB - 10 kHz
Filters
H.P.: 300 Hz / 12 dB/oct.
L.P.: 7 kHz / 12 dB/oct.
Controls
1 master volume
1 treble
1 bass
Power supply / Consumption
115/230 Vac (±5%) -
50/60 Hz / 180 VA (UP 4061)
115/230 Vac (±5%) -
50/60 Hz / 450 VA (UP 4121)
115/230 Vac (±5%) -
50/60 Hz / 550 VA (UP 4161)
Inrush current
I=20A (UP4061)
I=23A (UP4121)
I=25A (UP4161)
Absorption in DC (24 V)
5 A (UP 4061)
10 A (UP 4121)
14 A (UP 4161)
Maximum ambient temperature
55° C
Dimensions (lxhxd)
433 x 88 x 315 mm
Weight
9,4 kg (UP 4061)
11,4 kg (UP 4121)
12,9 kg (UP 4161)