Need help?Do you have a question about the RCF QPS 9600 and is the answer not in the manual?
General| Built-in display | Yes |
|---|---|
| Purpose | Performance/stage |
| Cooling type | Passive |
| Product color | Black |
| Volume control | Rotary |
| Connectivity technology | Wired |
| Amplifier class | A/B |
| Frequency range | 20 - 20000 Hz |
| Audio output channels | 2.0 channels |
| Peak power per channel | 300 W |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Total Harmonic Distortion (THD) | 0.01 % |
| RMS power output per channel (4 Ohm) | 185 W |
| RMS power output per channel (8 Ohm) | 125 W |
| Bridge-mode power output per channel (8 Ohm) | 375 W |
| Line inputs (RCA) | 2 |
| Speakers connectivity type | Binding post |
| LED indicators | Power, Status |
Weight and Dimensions| Depth | 101.6 mm |
|---|---|
| Width | 257.5 mm |
| Height | 482.6 mm |
| Weight | 8800 g |
Covers numbered safety points 1 through 7 regarding power, liquids, and user access.
Highlights key attributes like response, distortion, operation modes, protective circuits, and connectors.
Specifies unsuitable locations for installation to ensure proper operation and longevity.
Details the power switch, LEDs, and level controls for managing amplifier output.
Explains the various XLR inputs, balanced outputs, and SPEAKON speaker outputs on the rear panel.
Configures the internal software limiter (SOFT/HARD) for different transducer types.
Sets the maximum output voltage peak to match connected speakers using dip switches.
Enables bridging of channel pairs for increased power output.
Adjusts the common input gain for all channels in 3 dB steps.
Selects between independent channels or a mixed mono input for all outputs.
Describes standard operation where each channel functions independently.
Details using one pair of channels bridged and the other two independently.
Explains configuring both channel pairs for bridged operation, doubling output voltage.
Sets up the amplifier for mono operation, sending a single mixed input to all outputs.
Illustrates correct wiring for single channel, dual channel, and bridged SPEAKON connections.
Emphasizes the need for adequate airflow for the forced cooling system.
Lists detailed technical data including output power, frequency response, and dimensions.
To Next Page
