Need help?Do you have a question about the RCF UP 4242 and is the answer not in the manual?
General| Type | Power Amplifier |
|---|---|
| Channels | 2 |
| THD+N | < 0.1% |
| Signal to Noise Ratio | > 100 dB |
| Connectors Input | XLR |
| Connectors Output | Speakon |
| Damping Factor | > 200 |
| Frequency Response | 20 Hz - 20 kHz |
| Input Impedance | 20 kOhm |
| Protection | DC, thermal |
| Cooling | Forced air |
| Power Supply | 50/60 Hz |
To Next Page
