To Next PageTo Next Page
Need help?Do you have a question about the RCF UP1123 and is the answer not in the manual?
General| Type | Power Amplifier |
|---|---|
| Channels | 2 |
| Power Output (4 Ohms) | 1200 W |
| Frequency Response | 20 Hz - 20 kHz |
| Damping Factor | >200 |
| Input Impedance | 20 kOhm balanced |
Key safety instructions for installation, operation, and handling of the product.
Instructions on ventilation, load limits, controls, and cleaning.
Details on XLR and screw terminal connections for audio inputs.
Connecting speakers using 70V or 100V constant voltage outputs.
Connecting 4 Ohm loudspeakers and impedance considerations.
Description of BASS, TREBLE, and Master volume controls.
Explanation of the 5 LEDs for output level and the ON indicator.
Location and function of the unit's power switch.
Details on XLR and screw terminal audio inputs.
Controls for phantom power and microphone/line sensitivity.
Connections for loudspeakers and 24V DC power supply.
Amplifier earth terminal and AC power cable connector.
Nominal power, loudspeaker output impedance, and voltage options.
Details on microphone and line input sensitivity and impedance.
Performance characteristics of the amplifier's frequency response and distortion.
AC/DC power supply voltages, absorption, and protection mechanisms.
Physical size and weight of the UP 1123 amplifier.
