RCF UP1123 - Technical Specifications; Power and Loudspeaker Output Ratings; Input Sensitivity and Impedance; Frequency Response and Distortion

14
ENGLISH
SPECIFICATIONS
UP 1123 MODEL
Nominal power: 120 W
Loudspeaker outputs: 100V (83.33 Ω), 70 V (40.9 Ω), 4 Ω
Input sensitivity (MIC / LINE):
- MIC: 1.5 mV (-54 dBu), balanced
- LINE: 300 mV (-8 dBu), balanced
Input impedance:
- MIC: 2.4 kΩ
- LINE: 10 kΩ
Input connectors: XLR, screw terminals
Frequency response: 50 Hz ÷ 15 kHz (± 3 dB)
Distortion: THD + N ≤ 2% @ 1KHz (at nominal power)
Signal / noise ratio :
- MIC : ≥60 dB
- LINE : ≥75 dB
Tone controls:
BASS 100 Hz ±10 dB
TREBLE 10 kHz ± 10 dB
Protection: short circuit, thermal, AC / DC fuse
Input phantom power supply voltage: 21 V
AC power supply voltage: 230 – 115 V (50-60 Hz)
(see the rear panel indication)
AC power supply absorption (power): 350 VA
DC power supply voltage: 24 V
DC power supply absorption (current): 8 A
Dimensions: 482 mm (l) x 88 mm (h) x 260 mm (d) (two 19” rack units)
Weight: 10 kg