RCF QPS 9600 - Rear Panel; Rear Panel Connectors

8
ENGLISH
REAR PANEL
female XLR connector male XLR connector
PUSH
2 1
3
21
3
Xlr pIns: 1 ground, 2 audIo sIgnal (+ , hot), 3 audIo sIgnal (–, cold)
5A
CHANNEL A INPUT
Channel A balanced audio input (female XLR connector).
5B
CHANNEL B INPUT
Channel B balanced audio input (female XLR connector).
Do not connect this input when channels A and B are bridged.
5C
CHANNEL C INPUT
Channel C balanced audio input (female XLR connector).
5D
CHANNEL D INPUT
Channel D balanced audio input (female XLR connector).
Do not connect this input when channels C and D are bridged.
6A
CHANNEL A BALANCED OUTPUT
Channel A balanced parallel audio output (male XLR connector).
This output is linked in parallel with the channel A input and is useful to connect another
amplier.
6C
CHANNEL C BALANCED OUTPUT
Channel C balanced parallel audio output (male XLR connector).
This output is linked in parallel with the channel C input and is useful to connect another
amplier.
7A
CHANNEL A (+ B) SPEAKER OUTPUT
Channel A output to speakers
(SPEAKON connector, which also includes the channel B output).
See both ‘Operation modes’ and ‘SPEAKON connector wiring’ manual sections.
7B
CHANNEL B SPEAKER OUTPUT
Channel B output to speakers (SPEAKON connector).
Do not connect this output if the channels A and B are bridged.
See both ‘Operation modes’ and ‘SPEAKON connector wiring’ manual sections.
7C
CHANNEL C (+ D) SPEAKER OUTPUT
Channel C output to speakers
(SPEAKON connector, which also includes the channel D output).
See both ‘Operation modes’ and ‘SPEAKON connector wiring’ manual sections.
11
10
SPEAKER OUTPUTS
C(+D) A(+B)D B
+ 1+
– 2–
BRIDGE
+ 1+
– 2–
BRIDGE
1+ CH D+
1– CH D–
1+ CH B+
1– CH B–
6C 5D 7D5B 7B5C 7C5A 7A16 15
13
14
6A
12
9D 9C 9B 9A
8D 8C 8B 8A
PUSH PUSHPUSH PUSH
1+ CH A+ 2+ CH B+
1– CH A– 2– CH B–
1+ CH C+ 2+ CH D+
1– CH C– 2– CH D–