Start the vacuum cleaner to remove the dust as shown on
the right and thoroughly shake out the minute dust with a fine
brush.
If you finish cleaning the incubator, reassemble it in the
reverse order of disassembly. Wipe out outside the main
body with a wet cloth and dry it in a cool and well-ventilated
place before storage.
If the incubator goes through incubations several times,
dust, shell, etc. accumulate inside the main body,
which may cause a break down, so be sure to clean
the product before storage.
In case the incubator clean status is poor
which may cause fan noisy or stopping.
Don't clean the product with organic solvents such as
benzene, thinner, etc. which may cause deformation or
decoloration.
AUTOELEXAUTOELEX
AUTOELEXAUTOELEX
Cleaning
the fan
DIGITAL INCUBATOR
4. How to Clean
(1) Disassembling and
Cleaning the Incubator
11
USA & Canada Official Sales & Service https://www.R-Com-Hatcher.com
Insect Incubator Rcom Max 90 User Manual
To Next Page
Loading...
