Rcom MAX 50 - Identification of Parts

DIGITAL INCUBATOR
6
1. Introduction
(3) Identification of Parts and
Compositio
Water overflow hole
Hole that water flows out of the product
automatically when you pour water into the water
hole more than required amount(1300~1400cc).
Identification of Parts
Basic Components
Universal Tray Divider
Adjust the space of dividers
according to egg size.
Handle
Handle
W
A
T
ER
P
ULL OPEN
Power Connecting (the rear)
For connecting power cord.
For inlet of air
from outside
Air inlet vent
For circulating warm air
Vents for air circulation
Serial No.
Water hole
To facilitate water top-up
for the humidity control.
Digital Control Center
See description of
the function and operation.
Main Body-1
Main Body-2
Locking Button
View Window
For a clear view of
the incubation process.
(Double Skin Viewing Window)
Water Cap
View Window
Main Body-1
Main Body-2
Universal Tray
Divider(10EA)
Universal Tray SET
Power Cord
Small egg
Tray
Standard egg
Tray
Large egg
Tray
User's Manual
Easy function
operation
Rolling Divider SET
Sold Separately
W
AT
E
Volt for window assembly
Duplicated
View Window
(EX:RCM0950278)
If you register your information with
your machine’s serial number on our
web-site(www.Rcom.co.kr),
you can get 2 year warranty service.
Egg-Turning Plate