Rcom MAX 50 - Digital Control and Operation

Humidity UP Button
Setting Humidity Up
DIGITAL INCUBATOR
7
1. Introduction
(4) Function of Digital Control &
How to Operate
[ Function Operation & Explanation ]
Function of Digital Control & How to Operate
※ If you want to change setting value, keep pressing "SET" button and change the value.
※ put some water after take off label from the back and attach to the window.
How to OperateFunction
Explanation
Changing
Cels. & Fahr.
Changing Cels. & Fahr.
Temp.
Setting
Setting of needed temp.
Humidity
Setting
Egg-Turning
Interval Setting
Setting of needed humidity.
How to OFF
Humidification
Function
Egg-Turning
Test
Egg-Turning Test (once)
Initialization
(Factory setting)
Initialization
Set Humidity as 20%
Egg-Turning Interval Setting
as required
2 Hours
once 2 times
3 Hours
3 times(OFF)
Lamp OFF
Default setting
every1 hour
(Lamp: ON)
4 times
every 1 hour
(Lamp ON)
repeat
20%
Temp. UP Button
Temp. Display Humidity Display
(Blink with water shortage)
Temp. DOWN Button
Setting Temp. Up
Setting Temp. Down
Turn on with automatic
egg-turning mode.
(Blink when working)
- Alarm for water supplement sounds in twice.
( First alarm with water shortage / Second alarm after 3 hours )
Water Supplement Lamp
Egg-Turning Lamp
(Lighting when working)
Heater Lamp
(Lighting when working)
Humidification working lamp
Power Failure Alarm Function
Blink with power failure
(to remove, press SET button)
Setting value check
Setting Button
Egg-Turning Setting Button
Automatic egg-turning setting
or cancellation
/ Egg-turning test
Humidity DOWN Button
Setting Humidity Dow Setting Humidity Down
Setting Temp. Down
Automatic egg-turning setting
or cancellation
/ Egg-turning test
Setting value check
What’s ‘Temperature&Humidity Setting’?
This is that you set up temp.&humi. As you want to have inside of the machine.