RD DP30V5A - User Manual

Please read this instruction carefully before using
Constant Voltage Constant Current Programmable
Control Supply Power Module
Product model: DP30V5A
General Information
The constant voltage and constant current programmable control power
supply module put the collection of analog integration and digital control
functions in one. Its adjustable output voltage range is 0-32.00V, step by 0.01V.
Its adjustable output current range is 0-5.000A, step by 0.001 A. This module
has power-down stored function and can store 10 groups preset value. And it
also has the function of extracting quickly two groups stored value. Compared
with the traditional analog power supply, it is more convenient to quickly extract
the voltage or current required. LCD display on the module has the function
digital voltmeter and ammeter. You can view the preset voltage, input voltage,
output voltage, the preset current, output current, output power, etc. on the
output state remind area, you can see that output opens or not, the state of
constant voltage and constant current, output is normal or not, the key is locked
or not, and the current data groups that is being used. On the setting data
interface, you can adjust over-voltage value, over-current value, over-power
value, data set and LCD brightness. This module has many advantages, small
size, advanced function, good visual effect, high operability, high-precision,
being used independently, being inset into the device and been widely applied.
Technical parameters
Input voltage range: 6-40V
Output voltage range: 0V-32.00V
Output current: 0-5.000A
Output power range: 0-160W
Product Weight: 86g
Output voltage resolution: 0.01V
Output current resolution: 0.001 A
Product Dimension: 79mmX43mmX48mm
Open size: 71mmX39mm
Output Voltage accuracy: ± (0.5% + 1 digit)
Output Current accuracy: + (0.5% + 2 digits)
Note: You must make sure that input voltage is 1.1 times higher than output
voltage. Under large current circumstances, pay attention to heat elimination.

RD DP30V5A Specifications

General

Voltage Resolution	0.01V
Current Resolution	0.001A
Output Voltage	0 V to 32 V
Output Current	0 A to 5 A
Output Power	160 W
Energy Measurement	Yes
Protection	Over Voltage, Over Current, Over Temperature
Input Voltage	6-40V
Operating Temperature	-10°C to 45°C

Summary

General Information

Technical Parameters

Connection Description

Panel and Interface Description

Main Interface Overview

Describes the primary display screen showing voltage, current, power, and input voltage status.

Data Setting Interface

Details the interface for configuring output voltage, current, and protection settings.

Operating Instructions

Setting Output Voltage and Current

How to adjust output voltage and current directly from the main interface using the potentiometer.

Configuring Data Settings

Describes navigating and adjusting settings within the data setting interface.

Setting Protection Values

Details how to set over-voltage, over-current, and over-power protection values.

Adjusting Screen Brightness

Explains how to adjust the LCD screen brightness levels from 0 to 5.

Data Group Management and Functions

Data Setting and Storage

How to manage and save data groups for preset configurations.

Output Control

How to enable or disable the power supply output using a dedicated button.

Button Lock Function

Instructions for locking and unlocking the device's buttons to prevent accidental changes.

Data Group Extraction

How to load preset configurations stored in M1/M2 or any specified data group.