13 Declaration of Conformity
As referred to in the guidelines:
1. EMC Directive 2014/30/EU
2. Low voltage Directive 2014/35/EU
3. RoHS Directive 2011/65/EU
RDA BV, located at Spoorakkerweg 6 , 5071 NC Udenhout hereby declares that the product listed
below complies with the above-mentioned EC directive and is intended solely for installation in a
doorway as described in the manual.
FirePro
(FirePro, Fire door control, 2016-TT-SG-FP, Sr. Nr........................................)
Applied (parts of) European standards:
EN 60204-1 Safety of machinery-electrical equipment of machinery-Part 1:
General requirements
EN 61000-6-2 Electromagnetic compatibility (EMC) part 6-2 general standard –
interference immunity for industrial environments
EN 61000-6-3 Electromagnetic compatibility (EMC) part 6-3 general standards
– interference emission for household, commercial and light
industrial environments
On the reasoned request of the national authorities, we shall provide the relevant information of
this incomplete machine
Authorized representative for the composition of the technical documents
(EU address internally)
Ing. Teun Tielemans
Documentation authorized representative
This product is an unfinished machine as referred to in the EC Directive 2006/42/EC and is
intended to be incorporated into other machinery (or other unfinished machinery/installations) or
merged with it to form a complete machine as referred to in the directive. This product may
therefore only be put into operation if it is established that the entire machinery/installation in
which it is incorporated complies with the provisions of the abovementioned directive.
Udenhout 03-10-2018 Corné Ribbers
Director Signature
To Next Page
Loading...