Need help?Do you have a question about the REA VeriCube and is the answer not in the manual?
General| Storage Temperature | -20°C to 60°C |
|---|---|
| Supported Codes | 1D and 2D barcodes |
| Light Source | LED |
| Connectivity | USB |
| Interface | USB |
| Supported Barcodes | Code 128, QR Code, Data Matrix |
Details the standard items included in the REA VeriCube package.
Describes different models of the REA VeriCube, such as Standard, Pharma, UV, and IR.
Lists optional parts available for purchase and activation.
Describes additional software features and their activation methods.
Essential safety precautions and warnings for using the REA VeriCube.
Specific safety measures required when operating the REA VeriCube UV model.
Warnings and precautions related to electrical safety when using the device.
Details the standard design of the REA VeriCube and its features.
Describes the Pharma design variant of the REA VeriCube for specific environments.
Explains the features and operation of the REA VeriCube UV model with ultraviolet illumination.
Details the REA VeriCube IR models with infrared illumination capabilities.
Information on connecting the REA VeriCube to a power source via PoE.
Specifies the necessary hardware and software for operating the REA VeriCube.
Addresses potential issues from temperature variations and condensation.
Instructions on how to connect the REA VeriCube to a PC and network.
Lists required ports and firewall configurations for network communication.
Guidance on setting up fixed IP addresses for network connectivity.
Step-by-step guide for installing the REA TransWin32 software.
Explains how to select and install software components and device options.
Procedure for replacing the camera lens modules on the REA VeriCube.
Basic guidelines for handling the REA VeriCube to prevent damage.
Key points to observe for accurate measurements with the REA VeriCube.
Explanation of the functions of the device's physical buttons and status LEDs.
Detailed steps for performing measurements using the TransWin32 software.
How to configure and use the automatic measurement mode for efficient operation.
Procedures for recording, opening, and saving image files for analysis.
Options for displaying and customizing the detail level of test reports.
How to set up grading standards and evaluation methods for barcodes and matrix codes.
How to choose and configure the symbologies to be tested and evaluated.
Adjusting lighting conditions and aperture for optimal measurement.
Storing and recalling custom device configurations as profiles.
Configuring how test reports and data files are saved, including naming conventions.
Saving and importing calibration and service data for device backup and transfer.
Setting up user accounts, passwords, and access levels for device operation.
Basic configuration for user authentication and password protection.
Activating and configuring user management features for the device.
How user login and management functions during the device's operation.
Locking specific software settings to prevent unauthorized changes.
Troubleshooting common network connection issues and IP address conflicts.
Steps for temporarily changing and permanently configuring the device's IP address.
Instructions for cleaning the glass pane, mirror, and camera lens module.
The terms and conditions for using the REA VeriCube software.
Details on available customer support services and limitations.
Information regarding export restrictions applicable to the software.
Clauses related to software maintenance and its limitations.
Defines the manufacturer's liability limitations for software usage.
Key technical specifications of the REA VeriCube verifier, including power and housing.
Details on the measurement program, software extensions, and supported symbologies.
Technical data for the available camera modules and their field of view.
Procedures and conditions for device repair under the guarantee period.
Instructions on how to return the device for repair, including packaging.
Information on obtaining customer service after the guarantee period expires.
General terms and conditions related to the product guarantee.
Explains the meaning of symbols used throughout the operating manual.
Defines common abbreviations used in the document.
Provides essential instructions for proper and safe handling of the device.
Outlines the responsibilities of managers regarding device operation and safety.
Defines the responsibilities of users when operating the device.
Specifies the intended applications and limitations of the REA VeriCube.
Guidelines for the proper recycling and disposal of the REA VeriCube.
To Next Page
