38
© 2006 Directed Electronics
option
a. Option 1: Press the transmitter button assigned to
the Remote Start function (usually the button) to
set factory default Option 1.
The LED will turn ON and the Horn/Siren will pulse once.
b. Option 2-4: Press the transmitter button assigned to
the CarFinder function (usually the button) to set
Options 2-4 if available.
The LED will flash and the Horn/Siren will pulse 2-4
times to indicate the option and the LED continue to
flash to indicate the option.
Access a different Menu:
To change features in a different menu or return to the beginning
of the accessed menu return to Step 2 under Accessing a Menu at
any time.
Advance to different feature location:
To advance to a new locations within the same menu
press/release the Momentary Switch the same number of times as
the difference between the feature locations.
example! to advance from feature location 2 to feature
location 8 press/release (do not hold) the Momentary
switch 6 times, after 2 seconds the LED will flash 8
times to indicate the newly accessed feature location.
To Next Page
Loading...