Need help?Do you have a question about the Realistic LAB-2100 and is the answer not in the manual?
Crucial safety precautions including electrical shock risks and symbol explanations.
Connecting RCA plugs to amplifier/receiver inputs for audio signal.
Connecting the ground wire to reduce or eliminate hum.
Plugging the AC power cord into a suitable power source.
Initial steps for powering on, setting size/speed, and starting playback.
Continuing playback controls, stopping, manual play, and important operational notes.
Advice on preventing howl, induction hum, and proper record handling for optimal audio.
Procedures for cleaning the cabinet, dust cover, and managing dust on records.
Guidance on when and how to replace the stylus to prevent record damage.
Instructions for cleaning the elevation-rubber using alcohol-dipped cloth.
Explanation and remedy for the tone arm not descending during playback.
Steps for securing the unit, including stylus protector and tone arm, for safe transport.
General| Drive method | Belt drive |
|---|---|
| Speeds | 33 1/3 and 45 RPM |
| Overhang | 15 mm |
| Weight | 6.5 kg |
| Tonearm | Static balanced type |
| Cartridge weight range | 4 to 8g |
| Platter | Aluminum die-cast |
To Next Page
