30
Step 3.1.1 : When set TTLS
Set Tunnel Type to CHAP , MSCHAP , MSCHAP-V2 , PAP , or EAP-MD5
Step 3.1.2 : When set PEAP
Set Tunnel Type to MD5 , GTC , TLS , or MSCHAP-V2
Step 3.2 If you do not set PEAP to TLS ,you could use certificate.
Step 4 : After you finish above steps.
You should fill up the following fields( Username , Identity , Password ).
User name : Certificated user name .
Identity : User's identity in the RADIUS server
Password : User's pass word in the RADIUS server
To Previous Page
Loading...
