Need help?Do you have a question about the Realtek RTL8710BN and is the answer not in the manual?
Information on obtaining and using the IAR Embedded Workbench IDE for development.
Details the Ameba-Z board layout, including USB UART and SWD connection points.
Explains the J-Link SWD interface connection and shows the physical setup.
Initial steps for building: open IAR Workbench and project workspace.
Setting processor variant, core, and floating point options in IAR project properties.
Instructions for building bootloader and OTA image binaries.
Details the location of mbed APIs for project integration.
Steps to configure J-Link debugger and connection interface for downloading code.
Procedure for downloading the application to the device via IAR.
Steps to start debugging, trace code, and set breakpoints in IAR.
Note on ROM code and bootloader symbol lists for tracking functions.
Steps for preparing the Ameba-Z board for image download via UART.
Steps to select serial port, baud rate, and load image files using the PC tool.
Overview of the Image Download Tabpage interface and its settings.
Instructions to copy 'inc' and 'src' folders for using peripheral sample code.
Details the directory structure and mentions MBED API for peripheral code.
FCC Part 15 compliance, guidelines for preventing harmful interference.
FCC radiation exposure limits, user manual notes, and end product labeling.
Details of supported antennas including brand, type, and gain.
General| Manufacturer | Realtek |
|---|---|
| Model | RTL8710BN |
| Wireless Standard | IEEE 802.11b/g/n |
| Frequency Band | 2.4 GHz |
| Max Data Rate | 150 Mbps |
| Security | WEP, WPA, WPA2 |
| Operating Voltage | 3.3 V |
| Category | Wireless module |
| Interface | UART |
| Power Supply | 3.3V DC |
| Operating Temperature | -40°C to +85°C |
To Next Page