To Next PageTo Next Page
Need help?Do you have a question about the Realtek RTL8852B and is the answer not in the manual?
Specifies operating temperature and relative humidity for the module.
Defines temperature and humidity ranges for storing the module.
Provides the Mean Time Between Failures calculation for the module.
Details FCC compliance regarding harmful interference and device operation.
Outlines FCC cautions for modifications and provides steps to correct interference.
States compliance with FCC RF exposure limits and installation distance requirements.
Covers applicable FCC rules, operational use conditions, and limited module procedures for OEMs.
Details antenna designs, RF exposure considerations, and certified antennas for OEMs.
Specifies required FCC ID labeling and general compliance information for the final product.
Details test modes, additional testing, and Part 15 Subpart B disclaimer for OEM integration.
Guidance for OEMs on information to be provided to end-users regarding module installation.
Defines OEM/Host manufacturer responsibilities for product compliance and re-assessment.
States compliance with ISED's licence-exempt RSSs and operational conditions.
Specifies RF exposure limits and installation distance for Canada.
Details required labeling for the final product, including FCC and IC IDs.
Guidance for OEMs on what information must be included in the end-user manual.
Lists cautions for device operation, including band restrictions and antenna gain limits.
Details Canada transmitter approval and restrictions on antenna types and gain.
Taiwan NCC compliance statements regarding frequency, power, and antenna usage.
Requirement for host system labeling with MIC ID for Japan.
States conformity with UK Radio Equipment Regulations and lists applicable standards.
Identifies the Approved Body (Timco Engineering, Inc.) involved in conformity assessment.
Lists maximum transmitted power for WLAN in EU for various modes and bands.
Lists maximum transmitted power for Bluetooth (EDR, LE) in EU.
Specifies that 5.15-5.35GHz band operations are restricted to indoor use.
Step-by-step guide for installing the PCIe NGFF module and connecting antennas.
Procedure for removing the Wireless PCIe NGFF module and antennas.
Instructions for installing the RTL8852A AX MP driver and utility software.
Screens for entering user information and selecting installation setup type (Complete/Custom).
Steps for initiating the installation process and confirming completion via the InstallShield wizard.
Screens for selecting installation language and proceeding to the next installation step.
Steps to start the installation and finish the wizard for the Bluetooth MP Kit.
Procedure to uninstall RTL8852BE WLAN, BT driver, and MP UI via Control Panel.
General| Bluetooth Version | Bluetooth 5.2 |
|---|---|
| Maximum Speed (2.4GHz) | 574 Mbps |
| Operating Voltage | 3.3V |
| Chipset | Realtek RTL8852B |
| Frequency Bands | 2.4GHz / 5GHz |
| MIMO Technology | 2x2 MIMO |
| MIMO | 2x2 |
| Interface | PCIe |
| Modulation | 1024-QAM |
| Security | WPA3 |
| Operating Temperature | 0°C to 70°C |
| Category | Wi-Fi 6 (802.11ax) and Bluetooth 5.2 Combo Chip |
| Max Data Rate | 1201 Mbps (5GHz), 574 Mbps (2.4GHz) |
