Need help?Do you have a question about the Realtek RTL8821CE and is the answer not in the manual?
Details operating temperature and relative humidity for the module.
Specifies storage temperature and humidity limits.
Provides the Mean Time Between Failures (MTBF) value.
FCC statement regarding interference and compliance with Part 15.
Compliance statement for Industry Canada regulations.
Regulatory requirements for Japan, including MIC ID labeling.
Guidance for OEMs integrating the module into host devices.
Lists approved antennas and their specifications for mobile/laptop use.
Minimum separation distances for antenna placement in host platforms.
Specifies required labeling for the final product, including FCC ID.
Instructions for end-user manuals regarding module installation/removal.
Restricts operation in the 5150-5250 MHz band to indoor use.
Details EIRP limits and potential radar interference in specific bands.
Notes the requirement for Dynamic Frequency Selection in certain bands.
Steps for installing the PCIe NGFF2230 module and connecting antennas.
Steps to remove Wi-Fi antennas and the module board.
Starts the installation wizard by running setup.exe and proceeding.
Handles driver prompts and Bluetooth package installation.
Covers language selection and finishing the installation.
Guides on how to uninstall the RTL8821CE WLAN driver.
Insert the NGFF2230 card and boot the system to show the adapter.
Choose to search automatically or browse for driver software.
Select driver files manually using "Have Disk..." option.
Confirms installation of unsigned driver software.
General| Wireless Protocol | 802.11ac |
|---|---|
| Frequency Band | 2.4GHz, 5GHz |
| Interface | PCIe |
| Bluetooth | Bluetooth 4.2 |
| MIMO | 1x1 |
| Max Speed | 433 Mbps |
| Operating System Support | Windows, Linux |
| Security | WPA, WPA2 |
To Next Page
