EasyManua.ls Logo

Realtek RTL8763BFR - User Manual

Default Icon
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
RTL8763B Series
RTL8763BM, RTL8763BF, RTL8763BFR, RTL8763BS, RTL8763BA
BLUETOOTH 5 DUAL MODE SOC
PRELIMINARY DATASHEET
(CONFIDENTIAL: Development Partners Only)
Rev. 0.93
7
th
, December 2017
Track ID: JATR-8275-15
Realtek Semiconductor Corp.
No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan
Tel.: +886-3-578-0211. Fax: +886-3-577-6047
www.realtek.com
Question and Answer IconNeed help?

Do you have a question about the Realtek RTL8763BFR and is the answer not in the manual?

Summary

Features

General Features

Details Bluetooth 5 compliance, RF capabilities, audio features, and connectivity interfaces.

RF Features

Details transmitter power, receiver sensitivity, RF port characteristics, and crystal oscillator.

DSP Audio Processing

Covers Tensilica Hi-Fi-mini DSP, MACs, voice codecs, and noise suppression.

Audio Codec Features

Details voltage range, DAC/ADC paths, speaker loading, SNR, EQ, and sampling rates.

Overview of RTLBTAPP

Files and Hardware Setup

Opening and Connecting RTLBTAPP

Selecting the Correct Interface

Guides on selecting UART interface and checking COM port in Device Manager.

DUT (Link) Test Mode Operation

Entering Link Test Mode

Provides steps to enter DUT Test Mode using HCI Reset and Test Mode buttons.

LE DUT TX;RX Test Configuration

Configuring LE Test Parameters

Details steps for LE Test, including mode selection, parameters, and start/stop actions.

BLE Direct Test Mode Setup

Realtek RTL8763BFR Specifications

General IconGeneral
Bluetooth VersionBluetooth 5.0
Audio CodecSBC, AAC
Operating Range10 meters
Flash Memory512 KB
Operating Voltage1.8V to 3.6V
Supported ProfilesA2DP, AVRCP, HFP, SPP, GATT
InterfaceUART, SPI, I2C
Power ConsumptionLow power consumption mode available
CPU32-bit ARM Cortex-M0
Operating Temperature-40°C to +85°C

Related product manuals