Realtree RTK200 - Removal from Crate; Wheel Parts; Steering Wheel

1
REMOVAL FROM CRATE
1. Remove the metal crate
from the Go-Kart.
2. Locate and Remove
Owner’s/Operator’s manual,
set up instructions and all
documentation.
Note: Read Owner’s /
Operator’s manual
thoroughly before starting
Go-Kart for the first time.
3. Locate and remove all
parts and hardware from
crate and set aside.
Note: Some hardware may
already be mounted on the
Go-Kart. This will have to be
removed and then re-
attached during assembly.
St eering Wheel
S t ee r i n g W h ee l
S teer ing W heel C ap
Wheel Parts
Rear Tires
Front Tires
Rubber Hub Caps
Rear Rack