Operating your REC TEC BULL
Power Button:
Press power button to turn grill on and adjust temperature knob to desired temperature.
• Turning the grill ON activates the automatic startup mode and illuminates the digital readout.
• If your grill fails to light itself within 30 minutes of startup, the Smart Grill Technology™ proces-
sor will turn the grill off and display ER-2 on the screen. See page 16 for ER Codes
•
Pressing the power button again activates the shut down mode of your grill. If grill’s actual tem-
perature is below 160ºF, pressing the power button will simply turn the grill off.
• When the power button is used to shut down your grill, the Smart Grill Technology™ processor
will stop adding pellets to the fire pot and the fan will continue running to completely burn the
pellets remaining in the fire pot. During this cooling process, the display screen will display FAN.
WIFI - Download app from Apple App Store for Apple devices or Google Play for Android de-
vices, and follow the directions on app.
Temperature Control Knob: Turn knob to select computer maintained temperature in 5º incre-
ments.( Range: 200ºF - 500ºF )
Additional Temperature settings: LO and FUL
LO: LO will display as actual temperature when knob is turned counterclockwise beyond 200ºF and
Xtreme Smoke will be activated. The grill will feed pellets to the fire at the minimum feed rate (low-
est rate possible to maintain a reliable fire). This will produce the most smoke and achieve the lowest
temperature possible, given environmental conditions / type of pellets used.
FUL: FUL will display as actual temperature when knob is turned clockwise beyond 500ºF. Grill will
feed pellets to the fire at the 100% of auger capacity. This will produce the highest temperature pos-
sible, given environmental conditions / type of pellets used.
Settings Button - Press and hold the setting button to access the adjustable parameters menu.
Short presses of the settings button will scroll through the adjustable parameters. Pressing and hold-
ing the settings button will exit the adjustable parameters menu.