RM-216 C.10 Easy Line Documentation
RDN 10000029 17 13.05.2014
Term Explanation
Solenoid valve (also relay valve) electromagnetically operated valve for the pneumatic
triggering of the filter membrane valves. The membrane valves in turn
release the compressed air strokes for filter cleaning.
Start/stop input Input on the RM-216 C for starting and stopping the cleaning via an
external ∆p switch.
Total no. of valves Number of all valves connected to the RM-216 C and to the expansion
modules.
∆p alarm
Differential pressure value at which an alarm is issued.
∆p-MAX
Differential pressure value at which the cleaning is started.
∆p-MIN
Differential pressure value at which the cleaning is stopped.
∆p mode
Operating mode of the filter control in which the cleaning of the filter
elements depends on the differential pressure ∆p.
∆p remote display
Display showing the differential pressure of the filter in a control room.
∆p switch
Switch which is triggered by a differential pressure value set and which
activates the filter cleaning.
To Next Page
Loading...
Need help?
General