Documentation RM-310 C / RM-310 CT / RM-310 C Plug and Play / RM-310 CT Plug and Play
RDN 10001104 5 14.07.2020
RM-310 C Plug and Play / RM-310 CT Plug and Play
The controller types RM-310 C Plug and Play / RM-310 CT Plug and Play differ from the types
RM-310 C / RM-310 CT in that the prefabricated cables from RECO are used to connect the I/O modules.
This means that the time required for electrical installation is considerably less. The RM-V 6 I/O modules
intended for this plug-and-play system are available with 6 (RM-V 6/6), 5 (RM-V 6/5), 4 (RM-V 6/4) or 3
(RM-V 6/3) valves.
Since the controller types RM-310 C / RM-310 CT and RM-310 C Plug and Play / RM-310 CT
Plug and Play do not otherwise differ, for the sake of simplicity only the types RM-310 C /
RM-310 CT are mentioned in the further descriptions of this manual. The complete type desig-
nations only appear where there are differences.
To Next Page
Loading...