Record Power DS300 - User Manual

1
Original Instruction Manual
DS300
12” Cast Iron Disc Sander
Important
For your safety read instructions carefully before
assembling or using this product.
Save this manual for future reference.
Always wear safety glasses when
using woodworking equipment.
Always read the instructions
provided before using
woodworking equipment.
i
Kg
Version 3.1
April 2014
To register this product please visit
www.recordpower.info
It is important to register your product as soon as possible in order to receive efficient after sales
support and be entitled to the full 5 year guarantee. Your statutory rights are not affected.
Please see back cover for contact details.

Summary

Explanation of Symbols

General Health and Safety Guidance

Safe Operation

Provides guidelines for safe operation, including PPE and appropriate dress.

Machine Assembly Instructions

Fitting the Disc Brake

Instructions for attaching the disc brake using hex head screws.

Fitting the Mitre Fence

Guidance on how to install the mitre fence into the table slot.

Fitting the Dust Port Adaptor

Steps to connect the dust extraction adaptor to the machine.

Securing Sander Base Assembly to a Workbench

Procedure for securely mounting the disc sander to a workbench.

Disc Sander Operation Guide

Sanding Techniques

Safe sanding practices, disc rotation, and workpiece positioning.

Angled Sanding Procedures

How to tilt the table for angled sanding using lock knobs and angle stops.

Using the Mitre Fence

Using the mitre fence for accurate angle sanding on workpieces.

Disc Brake Operation

Procedure for using the manual disc brake, with safety warnings.

Stalls and Blockages

Troubleshooting steps for blockages and machine stalling.

Power Failure Recovery

Explanation of the NVR switch and restarting after a power failure.

Maintenance and Adjustments

Setting Table to 90 Degrees

Procedure for aligning the table to a perfect 90-degree angle with the disc.

Aligning Table to Sanding Disc

How to adjust table alignment for a 2mm gap with the sanding disc.

Replacing the Sanding Disc

Step-by-step guide for safely removing and applying a new sanding disc.

Dust Extraction System

Importance of Dust Extraction

Explains why dust extraction is crucial for health, safety, and machine upkeep.

Record Power Dust Extractors

Details the range of Record Power dust extractors and chip collectors.

Troubleshooting Common Issues

Electrical Connection and Wiring

Parts List and Diagram

EU Declaration of Conformity

Record Power DS300 Specifications

General

Brand	Record Power
Model	DS300
Category	Sander
Language	English