17
EU Declaration of Conformity
Cert No: EU / DS300 / 1
RECORD POWER LIMITED,
Centenary House, 11 Midland Way, Barlborough Links,
Chesterfield, Derbyshire S43 4XA
declares that the machinery described:-
1. Type: Disc Sander
2. Model No: DS300
3. Serial No .........................................................................
Conforms with the following directives:-
MACHINERY DIRECTIVE 2006/42/EC
(repealing / replacing Directives)
LOW VOLTAGE DIRECTIVE 2006/95EC
EN ISO 12100-2/A1:2009
EN61029-1:2009
ELECTROMAGNETIC 2004/108EC
COMPATIBILITY DIRECTIVE EN55014-1:2006
EN55014-2/A2:2008
EN61000-3-2:2006
EN61000-3-3:2008
and conforms to the machinery example for which the
EC Type-Examination Certificate No. M8A100674171004, N8100674171005, E8N100674171003
at: TUV SÜD Product Service GmbH, Zertifizierstelle, Ridlerstrasse 65, 80339 München, Germany.
and complies with the relevant essential health and safety requirements.
Signed................................................Dated: 01/01/2014
Andrew Greensted
Managing Director
To Next Page
Loading...
