To Next PageTo Next Page
Need help?Do you have a question about the Record Power BDS250 and is the answer not in the manual?
General| Brand | Record Power |
|---|---|
| Model | BDS250 |
| Category | Sander |
| Language | English |
Mandatory safety symbols requiring specific actions before operation.
General warning symbols indicating potential hazards and risks.
Covers PPE, dressing, machine handling, and stability for safe operation.
Guidelines for maintaining a clear work area and ensuring electrical safety.
Precautions for operating the machine safely, including pre-operation checks.
Specific safety advice for belt and disc sanders, including work piece handling.
Information on relevant health and safety legislation and recommendations.
Details the terms, conditions, and duration of the Record Power product guarantee.
Outlines the step-by-step process for making a claim under the product guarantee.
Specifies limitations on Record Power's liability and clarifies consumer rights.
Instructions for securely fastening the sander to a workbench for stable operation.
Guidance on fitting the sanding disc and the protective guard.
Steps for attaching the work table to the sander's work support.
Detailed instructions for assembling and adjusting the main work table.
Procedure for ensuring the work table is correctly squared with the disc.
How to install, tension, and track the sanding belt for optimal performance.
Pre-operation checks and familiarization steps before using the sander.
Guidelines for inspecting the sander for correct gaps and belt condition before each use.
Important checks for the workpiece, ensuring no foreign objects and proper placement.
Procedure to follow if the machine stalls or becomes blocked during operation.
Instructions for safely restarting the machine after a power interruption.
How to tilt the work table for bevel sanding and maintain proper clearance.
Steps to adjust the belt bed between vertical and horizontal positions.
Technique for safe and effective surface sanding on the belt, including work support use.
Convenient method for sanding the ends of long workpieces using the belt.
Techniques for sanding curves on the idler drum and sanding disc safely.
Procedure for sanding small end surfaces on the disc using a mitre fence.
Detailed instructions for replacing the drive belt, including tensioning.
Information on lubrication requirements for the machine's ball bearings.
Explains the critical role of dust extraction for safety, machine upkeep, and performance.
Overview of Record Power's range of dust extractors and their suitability for different machines.
Recommendation for using air cleaners to remove fine airborne dust.
Details wiring colour codes, safety precautions, and diagrams for electrical connections.
Instructions for assembling the optional stand components.
Guidance on lifting and securing the sander onto the assembled stand.
Step-by-step instructions for assembling the optional pedal wheel kit.
How to operate the pedal wheel kit to move and position the machine.
