Red Hat DIRECTORY SERVER 7.1 Installation Guide

34 Chapter 4. Silent Installation and Instance Creation
RootDN= cn=Directory Manager
UseReplication= No
AddSampleEntries= No
InstallLdifFile= suggest
AddOrgEntries= Yes
DisableSchemaChecking= No
RootDNPwd= admin123
Components= slapd,slapd-client
[admin]
SysUser= root
Port= 23611
ServerIpAddress= 111.11.11.11
ServerAdminID= admin
ServerAdminPwd= admin
Components= admin,admin-client
[base]
Components= base,base-client,base-jre
[nsperl]
Components= nsperl561
[perldap]
Components= perldap14
4.1.2.2. Sample File for Using an Existing Configuration Directory
The following is an example of the install.inf file that is generated when you perform a typical
installation and you choose to use an existing Directory Server as the configuration directory:
[General]
FullMachineName= dir.example.com
SuiteSpotUserID= nobody
SuiteSpotGroup= nobody
ServerRoot= /opt/redhat-ds/servers
AdminDomain= example.com
ConfigDirectoryAdminID= admin
ConfigDirectoryAdminPwd= admin
ConfigDirectoryLdapURL= ldap://dir.example.com:25389/o=NetscapeRoot
UserDirectoryLdapURL= ldap://dir.example.com:18257/dc=example,dc=com
UserDirectoryAdminID= cn=Directory Manager
UserDirectoryAdminPwd= admin123
Components= svrcore,base,slapd,admin,nsperl,perldap
[slapd]
SlapdConfigForMC= No
SecurityOn= No
UseExistingMC= Yes
UseExistingUG= No
ServerPort= 18257
ServerIdentifier= directory
Suffix= dc=example,dc=com
RootDN= cn=Directory Manager
UseReplication= No
AddSampleEntries= No
InstallLdifFile= suggest
AddOrgEntries= Yes
DisableSchemaChecking= No
RootDNPwd= admin123

Red Hat DIRECTORY SERVER 7.1 Specifications

General

Brand	Red Hat
Model	DIRECTORY SERVER 7.1
Category	Server
Language	English