Protected Value Menu
The Protected Value Menu allows access to selected presets,
prescaler, and output time values without having them viewable
or changeable from the main display. To enter the protected
menu, the key is pressed and held, and a code value is
entered. The Protected Value Menu and the Programming
Menu are not available at the same time. See Front Panel
Accessible Functions With Program Disable, page 14, for
available options.
Access value parameters that are programmed for “P” or “n”
are accessible in the Protected Value Menu. Parameters selected
as “n” (no) are viewable from the main display, but can only be
changed in the protected menu. Parameters selected as “P”
(protected) are not viewable from the main display, but can be
viewed and changed in the protected menu.
-13-
MAIN DISPLAY LOOP
124
200
PRS
300
3
250
124
250
CodE
000
2
PRS
Prot
VALuES
1
000100
PrESEt
PRS
1
t 010
OutPut
2
PScALr
OutPut
999999
3
Prot
SAVE
CodE
Error
00002
PrESEt
PRS
2
0
OutPut
key held
for 2 seconds
(Cnt 1)
(Cnt 2)
(Cnt 1)
(Cnt 2)
Valid Code between
1 and 99 entered
(Displayed for
1 second)
Returns to main display
if Invalid Code entered
or key not pressed
within 10 seconds
(Displayed for 1 second)
Return to main display if
key held for 2 seconds or no
key pressed within 20 seconds
(Displayed for
1 second)
Values with Operator Access
programmed for 'P' or 'n'
appear in this menu and are
changeable when Programming
is disabled (1st level) and a
Code parameter value between
1-99 has been programmed
within the programming menu.
Protected Parameter Menu-
Preset Change
Mode
or keys are used to
change value. Press key
to enter value. Value entry
will abort if a key is not
pushed within 10 seconds.
or key
Values with Operator Access programmed for
'Y', or 'n' (not 'L' or 'P')
PRS
t 010
t 010
Figure 11, Protected Value Menu
To Next Page
Loading...
