red lion IAMS0002 - Electrical Specifications; Environmental Conditions; Mechanical Specifications; Common Specifications

LP1109 13
Electrical specifications
Environmental conditions
Specifications range ............................................... -20°C to +60°C
Calibration temperature ........................................ 20...28°C
Relative humidity..................................................... < 95% RH (non-cond.)
Protection degree .................................................... IP20
Mechanical specifications
Dimensions (HxBxD) ............................................... 109 x 23.5 x 104 mm
Dimensions, with PGMMOD (HxBxD) ................ 109 x 23.5 x 116 / 131 mm
Weights
IAMS0002 .............................................................. 145 g (5.1 oz)
IAMS0020 .............................................................. 159 g (5.6 oz)
IAMS0022 .............................................................. 170 g (6.0 oz)
Max. wire size ............................................................ 1 x 2.5 mm
2
stranded wire
Screw terminal torque ........................................... 0.5 Nm
Vibration ...................................................................... IEC 60068-2-6 : 2007 (IAMS0002)
IEC 60068-2-6 (IAMS0022/IAMS0020)
2...13.2 Hz .............................................................. ±1 mm
13.2...100 Hz ........................................................ ±0.7 g
Common specifications
Supply voltage, universal ..................................... 21.6...253 VAC, 50...60 Hz or
19.2...300 VDC
Max. consumption .................................................... ≤ 2.0 W
Fuse ............................................................................... 400 mA SB / 250 VAC
Isolation voltage, test / operation .................... 2.3 kVAC / 250 VAC
Communications interface ................................... Communication enabler PGMMODC1
Signal / noise ratio .................................................. Min. 60 dB (0...100 kHz)
Response time (0...90%, 100...10%):
Temperature input .............................................. ≤ 1 s
mA / V input .......................................................... ≤ 400 ms