LP1109 9
Technical characteristics
• When the devices are used in combination with a programming front (PGMMOD
00/C1), all operational parameters can be modified to suit any application. As
the devices are designed with electronic hardware switches, it is not necessary
to open the device for setting of DIP-switches.
• A green / red front LED indicates normal operation and malfunction. A yellow
LED is ON for each active output relay.
• Continuous check of vital stored data for safety reasons.
• 3-port 2.3 kVAC galvanic isolation.
• 4-port 2.3 kVAC galvanic isolation. (IAMS0022)
To Next Page
Loading...