red lion RL160U User Manual (English)

To Next Page

200567e 0902

OWNER'S

MANUAL

SUBMERSIBLE

UTILITY PUMP

RL160U

APPLICATION

This pump is suitable for portable applications where

the total head requirement (including pipe friction

losses) does not exceed the pump's maximum capabil-

ity. Also, the maximum solids size must not be greater

PRINTED IN

TAIWAN

BEFORE OPERATING OR

INSTALLING THIS PUMP,

READ THIS MANUAL AND

FOLLOW ALL SAFETY

RULES AND OPERATING

INSTRUCTIONS.

WARNING - ELECTRICAL PRECAUTIONS

All wiring, electrical connections, and system ground-

ing must comply with the National Electrical Code

(NEC) and with any local codes and ordinances. Em-

ploy a licensed electrician.

WARNING - RISK OF ELECTRICAL SHOCK

• Have an electrician provide electrical power to the

motor plug receptacle.

• Always disconnect plug from power source before

handling.

• This product is furnished with a three prong plug for

grounding, connect only to properly grounded recep-

tacle.

SAFETY

CAREFULLY READ THESE SAFETY

MESSAGES IN THIS MANUAL AND ON

PUMP.

CAUTION

• Review instructions before operating.

SAFETY WARNINGS

• Do not under any circumstances remove ground plug.

• Keep electric plug dry.

• Do not lift pump using cord.

• Not investigated for use in swimming pool area.

• A ground fault interrupter (GFI) protected circuit is

recommended for use with any electrical appliance

operating in or near water.

than the pump capability. This pump is for use with

water only, NOT FOR USE IN EFFLUENT OR SEW-

AGE APPLICATIONS!

RL160U

Need help?

Do you have a question about the red lion RL160U and is the answer not in the manual?

red lion RL160U Specifications

General

Horsepower	1.5 HP
Maximum flow rate	160 GPM
Voltage	115/230V
Inlet size	1.5 inches
Outlet size	1.5 inches
Maximum water temperature	140°F
Motor type	TEFC
Amperage	16/8 A

Summary

Safety Warnings

Electrical Precautions

All wiring, electrical connections, and system grounding must comply with the National Electrical Code (NEC) and local codes. Employ a licensed electrician.