7
ENG
Maintenance
• Do not lay objects on top of the LED Module or power supply
• Do not lay the LED Module on objects while powered on
• Inspect the LED Module regularly
• Unplug the LED Module from the outlet when cleaning to prevent
any shock hazards
• Wipe the LED Module with a damp cloth once a week.
DO NOT use Ammonia based cleaners. Avoid the power plug area.
A can of compressed air may be used to blow dust out of the heat
sink fins. Wiping and blowing unwanted buildup will help prevent
salt creep and hard water spots from accumulating.
• Do not allow any liquids to pool on top of or inside the LED Module.
For instruction videos, FAQs and support, visit:
support.aquaillumination.com
Scan this QR to register & activate your Red Sea
Hydra 26
™
HD LED
LED Indicator States
Pulsing Blinking Solid
● Blue + ● Green
booting
● Green
Parent attempting
to connect to
home network
● Blue
Child attempting to
connect to home
network
● Green
Parent with schedule
hosting access point.
Not connected to home
network
● Blue
Slave fails to connect to
network. Hosting an access
point
● Red
Contact Tech support
● Red + ● Green + ● Blue
Firmware update
● Blue + ● Green
Un-configured state
● Blue + ● Green
Configuring children
● Green
Potential parent
successfully
connected to a
home network
● Blue
Child successfully
connected to home
network
● Red
Thermal cooldown
To Next Page
Loading...
