RED COMPACT 18 - Page 44

42
12-MENU ENTRIES AND OPERATION
b - Cleaning
This function is only activated when the boiler is o. When it is activated, the fan turns at top speed so that the soot removed by the
turbulators is sucked in.
Use key 5 to go to the settings menu and select the Cleaning option. Conrm with key 5 and then with keys “b” (arrows) you can activate
or deactivate the function. Key 5 is used to conrm, while key 8 is used to go back to the main screen.
c - Load feed screw
This is for lling the the pellet loading system. This can be enabled only when the boiler is o. A countdown appears. The feed screw stops
automatically at the end of the countdown and the menu closes.
Use key 5 to go to the settings menu and select the Load Feed Screw option. Conrm with key 5 and then with keys “b” (arrows) you can
activate or deactivate the function. Key 5 is used to conrm, while key 8 is used to go back to the main screen.
d - Tones
This function is enabled by default.
Use key 5 to go to the settings menu and select the Tones option. Conrm with key 5 and then with keys “b” (arrows) you can activate or
deactivate the function. Key 5 is used to conrm, while key 8 is used to go back to the main screen.
8
< Tone >
On
5 8
Tone >
5
On
b
8
< Cleaning >
5
8
5
O
b
< Cleaning >
O
8
< Screw Loading >
5 8
5
O
b
< Screw Loading >
O