SMPTE Bars with Pluge
HD-SDI
Sets the1280 x 720p HD-SDI and HDMI monitor signal update rate to 50.00 or 59.94 Hz.
The default is 59.94 (720p 59.94) If in Europe you may wish to select 50.00 (720p/50.00)
HDMI
The camera includes a standard HDMI connector on its right side panel. This output provides a
HDTV compatible 1280 x 720 video signal or P.C monitor compatible 1280 x 848 pixel signal.
Note: If the PLAYBACK resolution is set to 1080p in the PLAYBACK menu, the HDMI output is
1280 x 720 pixels when in preview and record, but switches to 1920 x 1080 pixels in playback.
EVF Refresh
EVF Refresh: permits the operator to select the display refresh rate used by the RED-EVF.
To Next Page
Loading...
